Flat Thickness Copper Washer Flat Round Washers Hardware Assorted
Product description
Flat washer - copper washer: it is mainly made of copper material by stamping, and the pressure is through the stamping die. It has the advantages of low material consumption, light weight and good rigidity. After plastic deformation, the internal structure of metal is improved and the strength of stamping parts is improved. It has high dimensional accuracy, is consistent with the module size, and has good interchangeability. No further machining is required to meet the general assembly and use requirements. Good surface quality, smooth and beautiful appearance, provide convenient conditions for surface coating, electroplating, phosphating and other surface treatment.
Copper Washer is a kind of metal coated gasket, which is non-magnetic, conductive, heat-conducting and corrosion-resistant. Therefore, it can be used in heat exchanger, pressure vessel and other high-temperature and high-pressure sealing parts to effectively prevent gasket scattering and medium erosion,
There are many advantages of copper gasket, in addition to the well-known sealing performance, it also has good fire and flame retardant, corrosion resistance, wear resistance, compression resistance and other characteristics, and it also has a certain effect on heat preservation. Many properties of the gasket make it have a very long service life, and in the process of use, there will be no deformation, corrosion and other problems, which also plays a certain guarantee for the safety of equipment and other libraries.
Pay attention to the following points when installing the copper gasket:
1. Before installation, the quality of gasket shall be checked carefully, and the installation of interface shall be checked carefully to see whether there are defects such as wrong side, wrong side, opening, wrong side, etc.
2. The seal surface must be clean, and the gasket surface shall be free of mechanical impurities.
3. The gasket shall not be misplaced and the pressure shall be uniform.
4 when tightening the nut, the force shall be even, and the bolt shall be tightened symmetrically and evenly for two to three times to make the gasket press evenly.
More details
| Company Type | Manufacture factory SGS Audit supplier |
| Fearture | 1. High load capacity Cood anti-wearing 2. Low coefficients of friction
3.Good heat conductivity 4. High corrosion resistance
5.Long life and maintenance-free 6.No contaminant by oil or grease |
| Process | Centrifugal casting,sand casting,Machining,Injection |
| Quality assurance | 2D Projector, Height Gague,Micrometer,Roughness Tester,
CCD Autimatic Testing Machine CCD,Callipers |
| Port | QINGDAO ,TIANJIN ,SHANGHAI ,NINGPO PORT |
| Tolerance | Roundness::+/- 0.01mm.
Flatness:+/- 0.005mm.
Height and length:+/- 0.01mm. |
The application and defense of copper gasket are very extensive, and the preload required by the gasket is also different. For example, the preload required by the gasket for the thin flange of low-pressure water pump is lower. It is suitable for various economic fields such as national defense, electric power, machinery, petroleum, chemical industry, metallurgy, paper making, shipping, transportation, etc., with complete specifications and stable quality, and the products are sold all over the world.
Product Tags:
|
|
Flat Thickness Copper Washer Flat Round Washers Hardware Assorted Images
|
